Waxing Car With Buffer: What You Must Know For Beginners

Knowing how to properly wax your car using buffer can significantly increase the amount of time it takes to polish your car unless you are a fan of the old-fashioned method of applying elbow grease without buffers. In addition, it gives your paint a shiny finish to make your car appear incredible!

The following steps are an easy step-by-step process for people who want to learn how to wax an automobile using buffer.

• Get the Materials You Need
• Prepare the Surface
• Apply the Wax
• Buff the Surface
• Remove the Wax

While the process may seem daunting, especially for novices but it's easy to master the art of waxing your car using buffer.

How To Wax A Car With A Buffer

Applying wax to your car with the machine buffer isn't an arduous process. It can actually cut down on time as compared to doing it manually.

Prepare the Surface

To ensure that the surface is prepared for waxing, use pure water to wash your vehicle thoroughly. It is also recommended to remove dirt embedded in the car with clay bars.

The best way to apply wax is in the shade or in the garage. This will prevent direct sunlight that can dry the wax very quickly.

You must ensure that the car's surfaces are clean because the dirt that remains could result in scratches. Use a soft cloth when cleaning any dirt, such as bird droppings, so as not to scratch your car's surface.

The next step is the application of a premium automotive wax of the highest quality as well as a paint sealant.

Apply the Wax

Before you apply the wax, be aware of the different types of wax on the market today: liquid wax, spray wax, and paste wax.

The most simple option to apply is the liquid one, even though the use of paste wax is more difficult and requires more time; however, it provides an extended lasting result in comparison to the other two alternatives.

No matter which option you select, the first step is to choose a foam finish pad for applying wax. The pad should be able to absorb and soft but also strong enough to withstand the pressure of the power buffer.

Begin by attaching the pad of the applicator onto your machine buffer. Make a few dots of wax liquid onto the buffer pad to form circles, and then place an enormous spot in the center.

Then, rub the wax in a thin layer on some areas on the paint surface you're working on while the buffer is off. The wax will be spread across the surface, making it ready for polish.

Buff the Surface

Switch off the buffer of your machine, and then apply wax to the area using gentle pressure in long, straight, and sweeping strokes.

Then, quickly pass the section twice or three times; however, make sure there's plenty of wax covering the area to prevent any damage.

Be careful not to use too much pressure as you don't want to harm the paint. It is important to apply a consistent, thin layer of wax.

The intention behind this wax is to offer sealed protection from light scratches or water spots.

Remove the Wax

Once the wax is dry (check your product's instructions for further information), use a clean microfiber cloth to take any remaining wax from its surfaces. If necessary, use soapy water.

Helpful Tips:

• Make sure to use straight lines when cleaning wax to ensure that you do not scratch.
• Use a clean microfiber cloth to remove the majority of the wax. You can use another one to clean the remaining wax.
• It should also be a thin layer where you can still see the paint color of your car.